速報APP / 通訊 / Myo Dialer

Myo Dialer

價格:免費

更新日期:2016-07-23

檔案大小:1.4M

目前版本:3.1.1

版本需求:Android 4.3 以上版本

官方網站:http://lloydtorres.com/projects/myodialer/

Email:support@lloydtorres.com

聯絡地址:隱私權政策

Myo Dialer(圖1)-速報App

Myo Dialer was built from the idea that mobile devices make more sense with your Myo armband. Simply assign a contact with a gesture combination and you will be able to make calls with a flick of a wrist. There’s no need to even take your phone out of your pocket!

Features

• Send calls with a flick of a wrist without taking out your phone

• Assign up to four favorite contacts to specific gestures

• Ring your Myo armband on incoming calls

• Accept, end or reject calls and toggle the speakerphone/microphone with gestures

• Automatically enable the speakerphone on calls when Myo Dialer is active

Requirements

• Myo armband with 1.1.4 firmware or greater: https://www.thalmic.com/en/myo/

• Phone with Bluetooth Smart (BLE) support

Myo Dialer cannot be used to call emergency services such as 911 due to restrictions in Android. For your safety, please do not rely on this app to call emergency services.

Myo Dialer can send data to Thalmic Labs when it is connected to a Myo armband. For their privacy policy, see: https://thalmic.com/privacy/

Myo Dialer(圖2)-速報App

Permissions

This section explains the permissions required by the app.

Directly call phone numbers/read phone status and identity

These are required to make phone calls and to detect incoming calls.

Read your contacts

This is required to get contact information for selected contacts.

Disable your screen lock/prevent phone from sleeping

These are required to answer incoming phone calls, when your phone may be locked or asleep. The app will not remove your lock screen password or keep your phone constantly awake.

Full network access

This is required by the Myo and the crash reports service. You may disable these in the app settings.

Access Bluetooth settings/pair with Bluetooth devices

These are needed to pair with the Myo armband.

Myo Dialer(圖3)-速報App

Change your audio settings

This is needed to toggle the speakerphone and microphone during calls.

Myo Dialer(圖4)-速報App